Farmhouse Style Bathroom Makeover

A huge perk of working where we do (a camp and retreat center near Fort Worth, Texas) is that housing is provided. A not-such-a-perk is that the house is pretty dated. However – it is not without hope! It’s a brick ranch style home that has been added on to over and over again throughout the last 60 years. We have slowly been updating the house, room by room, on a pretty tight budget. The style I’m going for in this house is modern farmhouse, with lots of light colors and some dark metal accents. A little shiplap here and a little rustic there. If you’d like to see some photos of our progress, go check out #arrowheadhouseTX on Instagram! I’ll be sharing photos of our dining room, kitchen and master bedroom here on the blog soon, so stay tuned.

One of the first rooms to be completed is our guest/hallway bathroom. I’m very proud of this transformation – it seemed really dark and dingy before, but it’s now one of the lightest and brightest spaces in the house!

Here are a few photos of what it looked like when we moved in (In the words of Pepe Le Pew: “Le Yikes.”)

Oh, whats that? Fish tiles. Yep, tropical fish tiles. I think I found Nemo.

The bathroom was 100% functional, but not even 1% enjoyable. It had an icky sliding glass door on the shower, a 3-way mirrored medicine cabinet, and a yellowed marbled countertop on the dark brown particle board vanity. Although we didn’t have much to spend, the transformation is huge! A few coats of paint and a little love and this is what we have now (source list at the bottom of this post!):

One of the biggest transformations in this space is the vanity! It went from ugly-smelly particle board, to farm-house chic all thanks to a few coats of Rust-Oleum’s Chalked Paint as well as Rust-Oleum’s Tub & Tile Refinishing Spray Paint.

I’ve gotten a TON of questions on the process of painting this countertop and how it has held up. First, the biggest piece of advice I can give is – make your husband do it – hah! (Just kidding, but Josh did actually do it for me). No, the biggest piece of advice we can give is to PREP, PREP, PREP. Read the directions on the can, read them again, and then prep your surface REALLY well. It made all the difference in this project. Josh is meticulous about prep and taped the area off (using painters tape and plastic sheeting) really well so that we didn’t have overspray everywhere. The aerosol spray does create a pretty strong chemical smell, so make sure you wear a face mask and ventilate the area as best as you can. Overall, it has held up amazingly well! The counter itself wasn’t in the best shape to begin with (it has a few dings & dents). But the paint covered really well and has held up to daily handwashing (it’s the easiest-to-access restroom in the house) and occasional heavy use by guests incredibly well! No scratching or peeling yet – and it’s been finished for about a year now (#latetothebloggingparty).

Here’s the before again – I still can’t believe the difference!

Overall, I’m incredibly proud of this makeover and I think we spent under $250 on this space (I didn’t keep track, but from a quick add up in my head that’s the ballpark). I’d love to see a new vanity and oi – the tropical fish tiles probably need to go at some point (it’s a fun surprise for our guests, I guess ;). But, that’s down the line and for now we’re happy with it!

Source List: Some affiliate links are provided below. 

xo, Terra

 

 

How to Hang Plates Without Visible Hardware

Hello, blogland! I’m not even going to try to explain my 1.5 year hiatus…there’s really no great reason! But here I am feeling crafty so figured I should fire up the rusty ol’ blog again. I can’t make any promises as to how often I’ll be posting, but hopefully more often than every 18 months :)


 

How to Hang Plates Without Visible Hardware | Simply Mrs. EdwardsIn our dining room we have a sliver of wall space between the china hutch and doorway to the kitchen. I’ve always wanted to place something there, but nothing felt quite right. While browsing Pinterest, I happened upon this photo that I had pinned years ago. Plates! I could hang plates there. All I needed was…plates. And a way to hang them without them crashing down. So I started slowly collecting plates here and there. Most of them came from a local thrift store called Abbots and others from Goodwill. I don’t think I spent more than $2 on any of them!

The final thing to figure out was how to hang these things. I’ve never loved the plate hanger things that clamp on to the plate, so I started searching for a way to hang them without any visible hardware. I found these adhesive plate hangers, but at about $3.50 each, I figured I could come up with something a bit cheaper. We visited Josh’s parents a few months ago and my mother-in-law had just finished a plate wall in their dining room and it looked great! Lo and behold, she had figured out how to hang them without the visible hardware and didn’t spend a small fortune doing it. All credit goes to Debbie for this one :)

What I Used: 

Plates

Adhesive Hangers (similar)

E6000 Craft Adhesive

Hammer & nails

Paper, copier & dry erase marker

I started by washing my plates in warm, soapy water. Mostly to get the thrift store gunk and grime off of them, but also to ensure that the glue had a clean surface to stick to. Next, I traced all of my plates out on paper, cut them out, and taped them up on the wall to get an idea of the placement I wanted.

How to Hang Plates Without Visible Hardware | Simply Mrs. EdwardsOnce I had my arrangement down, I took a dry erase marker and marked the center top of each plate (making sure that the design on the front lined up).  This gave me a mark to line my hanger up to.

How to Hang Plates Without Visible Hardware | Simply Mrs. EdwardsYou may be able to find adhesive hangers that don’t have the little hook on them, but rather only an eyelet. Mine had the hook, so I simply took some tin snips and cut it off of each hanger. Easy fix!

How to Hang Plates Without Visible Hardware | Simply Mrs. EdwardsOnce I had my plates prepped, I took the E6000 and got to gluing! This stuff is SUPER sticky, but pretty forgiving for a while. On a few of my plates I didn’t get the hanger lined up on the first try, but it was really easy to slide it into the right spot. Be sure to get your eyelet above the rib or edge of your plate so that when it hangs, it lays flat. I let the adhesive dry for at least 24 hrs.

How to Hang Plates Without Visible Hardware | Simply Mrs. EdwardsAfter my hangers were really dry, I placed each plate on our copier and printed off a picture of the back side. Once cut out, I taped them up on to the wall over the other cutouts. This let me figure out the exact spot to place my nail. I hammered the nail right through the paper.

How to Hang Plates Without Visible Hardware | Simply Mrs. EdwardsOnce all the nails were in, I pulled the paper down and hung up the actual plates. And (unless you look REALLY closely at an angle) you can’t see any hardware!

How to Hang Plates Without Visible Hardware | Simply Mrs. Edwards

hilary swank backless dressI think this projected turned out really well! It was SUPER easy and affordable! We already had the glue, so buying the plates and the hangers…I think I came in under $15!

How to Hang Plates Without Visible Hardware | Simply Mrs. Edwards

I think this adds the right look to that awkward spot next to the hutch. I may keep my eyes out for a few more plates to add a couple to the top of the arrangement!

xo, Terra

 

DIY: Metal Folding Chair Re-Do

Metal Folding Chair Re-Do | Simply Mrs. Edwards

I’m not sure what it is about my Mom, but she has the BEST luck finding things for free on the side of the road. I hope to someday inherit her roadside-freebie-snatching skills. For about a year I’ve been keeping my eyes open for metal chairs to revamp. Ideally, I wanted ones with a cushioned seat, but any old metal chairs (that were less than $10/chair) would do. I wasn’t having any luck finding anything within my price range. Lo and behold, my Mom found 4 folding metal chairs WITH cushioned seats along the side of the road in my hometown. Score!

Metal Folding Chair Re-Do | Simply Mrs. Edwards

The problem was, they were in desperate need of some lovin’. Cue angels singing and my name being called from the craft store. For about $30 I was able to breathe some new life into these roadside freebies. Here’s how I did it!

Supplies Needed: 

Step 1: I began by removing the seat of each chair. One thing that I didn’t do but would definitely do next time is number each chair and seat as well as separate the screws according to which chair they came from. I ran into some issues getting the seats to fit back onto the chairs because I got them all mixed up. This may not be an issue with newer chairs, but you’ll be thankful if you do it with old used ones!

Metal Folding Chair Re-Do | Simply Mrs. Edwards

Step 2: I removed all of the staples and took off the old vinyl. Thankfully, the foam was in great shape (although a terrible color of neon yellow!) so I was able to reuse it. If you need new foam, now is the time to trace your seat base and cut out your foam and/or batting.

Metal Folding Chair Re-Do | Simply Mrs. Edwards

Step 3: I cut my fabric into 17″ x 18″ pieces. I probably could have cut them a bit smaller, but I found it helpful to have a little extra to pull snugly and then to trim off the excess.

Metal Folding Chair Re-Do | Simply Mrs. Edwards

Step 4: I lined up my fabric so that the pattern went in the direction I wanted it to face. I laid my fabric right side down, centered my foam and then lined up my chair seat. Once everything was lined up, I began stapling my way around the seat. I found it easiest to begin on one corner and work my way around the entire seat. It’ll probably take you a bit to find your groove, but once you do it should go pretty quickly! I thought the corners would be tricky, but they actually ended up being pretty easy! (See photos below for how I folded the fabric around the corners so that it would lay flat.) Once you get your fabric stapled down, trim off the excess.

Metal Folding Chair Re-Do | Simply Mrs. Edwards

Metal Folding Chair Re-Do | Simply Mrs. Edwards

Step 5: I repeated steps 3 & 4 with my vinyl. I ended up using a ton of staples to get it to fit snugly but hey, nobody will see them!

Metal Folding Chair Re-Do | Simply Mrs. Edwards

Metal Folding Chair Re-Do | Simply Mrs. Edwards

Metal Folding Chair Re-Do | Simply Mrs. Edwards

I should point out that my husband picked out the seat fabric. Great choice, huh?!

Next it was time to paint the metal chairs! It was too breezy to paint outdoors, so I moved my chairs into a well ventilated workshop. Please be sure to work in a well ventilated space, spray paint fumes are not good for your brain cells and future offsprings. 

Metal Folding Chair Re-Do | Simply Mrs. Edwards

Step 6: I pulled/cut off the old rubber feet and sanded the entire chair with 220 grit sand paper. Basically, I wanted to remove any rust spots and rough up the entire surface. Once I sanded down the surface, I went back over the chairs with a damp cloth to remove the dust & dirt.

Metal Folding Chair Re-Do | Simply Mrs. Edwards

Metal Folding Chair Re-Do | Simply Mrs. Edwards

Step 7: Paint. I chose Krylon indoor/outdoor gloss spray paint in “Bright Idea.” I ran out midway through the project, and had a heckova time finding more since I had bought the last can at our local hardware store. Thankfully, Walmart ended up being the ONE place within 50 miles that carried the brand/color. Word of advice, make sure you have enough paint to start off with! I used about 1 can per chair.

Metal Folding Chair Re-Do | Simply Mrs. Edwards

Also, I HIGHLY recommend using this fancy contraption called the Can Gun. My hubby got it for me for Christmas and this was the first time I broke it out. It makes spray painting a dream! No finger cramps or over-spray on your hands. Seriously, go buy one right now!

Metal Folding Chair Re-Do | Simply Mrs. Edwards

Metal Folding Chair Re-Do | Simply Mrs. Edwards

The essential to spray painting is to do multiple thin coats. Seriously, take your time and wait the manufacturers recommended time between coats. You’ll regret going too quickly because you’ll instantly get drips and splatters. I ended up doing about 3 coats on each chair and they turned out pretty well! I do have a few drips here and there, but nothing that I am going to lose sleep over.

This is what my chairs looked like after one coat of paint:

Metal Folding Chair Re-Do | Simply Mrs. Edwards

And after the third coat of paint:

Metal Folding Chair Re-Do | Simply Mrs. Edwards

Step 8: I reattached the cushions and voila! New chairs! (See my note above about numbering the cushions/bases/screws).

Metal Folding Chair Re-Do | Simply Mrs. Edwards
Metal Folding Chair Re-Do | Simply Mrs. Edwards

Metal Folding Chair Re-Do | Simply Mrs. Edwards

I still need to get new rubber feet for the chairs. I bought some but accidentally got the wrong size (mental note – measure twice, buy once!). Overall, I’m ecstatic with how these free roadside chairs turned out! They will work really well as additional outdoor seating for our next BBQ or indoor seating for our next movie night. The best part is that if I ever get tired of the fabric, I can easily pop off the seats and change it out! Yay for free chairs that turned out fabulous :)

Budget Breakdown:

  • Metal chairs: free!
  • Fabric: $11.50/yd.
  • Clear vinyl: $4.99/yd.
  • Foam: free!
  • Staples & staple gun: already owned
  • Sand paper: already owned
  • Spray paint: $15.50
  • Total: $31.99

With a fancy new place to sit,
Mrs. Edwards

DIY: Yarn and Nail Art

Yarn and Nail Art | Simply Mrs. Edwards

Since Christmas time, these blank planks of wood have been hanging on our living room wall staring at me. You may recognize the piece from our Christmas decorations this past year. My handy husband built the piece out of an old fence that blew down during one of our crazy storms a few years ago. I’ve been wanting to do something with it, but I’ve had some serious commitment issues. Not knowing what to paint/write/create, I was worse than a teenage girl choosing an outfit.

Yarn and Nail Art | Simply Mrs. Edwards

While driving home the other night I heard the song One Thing Remains by Jesus Culture come onto the radio. I love the lyrics, which always serve as a reminder that no matter the challenges of the day, God’s love is endless and always there. I had an ah-hah moment when I remembered the blaringly blank wood planks hanging on our living room wall!

A while ago, I found this photo via Pinterest and knew I wanted to try the yarn and nail letters somewhere. I figured that this was a great time to do so! This project turned out way better than I anticipated!

DIY Yarn & Nail Art 

Supplies needed:

  • A piece of wood or a blank wall where you’d like to create your piece
  • Nails (I used 1.5″ nails) & a hammer
  • Your words printed out on paper
  • Ruller, scissors, tape, chalk & a ballpoint pen
  • Craft paint & paintbrush
  • Yarn

Step 1: Measure out your working area and create your saying in Word or Illustrator. We used this free font from Dafont for the cursive letters and Helvetica Neue for the bold LOVE. My hunky husband created the words in Illustrator for me so that we could get the sizing perfect.

Yarn and Nail Art | Simply Mrs. Edwards

To make sure that my words were straight and spaced evenly, I drew a line along the bottom of each word and simply lined the guide-lines up and spaced the words 1″ apart. You’ll want to tape everything down once you get it situated (if you’re going to paint any of your words like I did, you can hold off on taping those ones).

Yarn and Nail Art | Simply Mrs. Edwards

Step 2: To create your nail outline, simply nail through your paper. You’ll want to be sure to place a nail on every corner of each letter and about every 2 inches in between. For the O, I just kind of eye-balled it, since there aren’t any corners (I actually added more nails to the outside of the O than what are pictured below). I tried to nail all the nails in evenly, leaving about 3/4″ sticking out. Once you get all of your nails in you can tear the paper away. There may be little bits of paper stuck beneath the nails, you can pull them out with your fingers or tweezers if you’re picky.

Yarn and Nail Art | Simply Mrs. Edwards

Step 3: Grab your yarn…

Yarn and Nail Art | Simply Mrs. Edwards

Tie a knot on one nail and begin wrapping! I found it helpful to wrap all the way around the perimeter of the letter and then go back and fill in. There’s not really any specific way to do this, just make sure to cover the entire area and go back around the perimeter a few times at the end. You’ll finish by tying another knot around a nail and trimming your ends.

Yarn and Nail Art | Simply Mrs. Edwards

Yarn and Nail Art | Simply Mrs. Edwards

Yarn and Nail Art | Simply Mrs. Edwards

Step 4: Now, it’s time to transfer your letters for painting (I’ve shown you this technique before over here). Flip your piece of paper over, grab a piece of chalk and cover the letters with a thick coat.

Yarn and Nail Art | Simply Mrs. Edwards

Position your words again, tape them down to secure, and trace with a ball point pen. 
Yarn and Nail Art | Simply Mrs. Edwards

This will leave a slight impression in your wood and a chalk line for you to follow with paint. My wood was pretty soft and the pen left a slight indent, so if you have a harder surface or if you’re doing this on a wall you’ll want to really make sure you’ve got the back of your paper covered with chalk so that it will leave a good transfer mark.

Yarn and Nail Art | Simply Mrs. Edwards

Step 5: Once you’ve traced all of your words, break out your paint. I used white acrylic paint. If you’re doing this on a wall or on something that will be outdoors, you’ll want to choose a paint that works best with your environment. Using a small paintbrush, simply fill in your chalk lines. I found it helpful to brush away the chalk dust before painting.

Yarn and Nail Art | Simply Mrs. Edwards

Yarn and Nail Art | Simply Mrs. Edwards

Let it dry and you’re finished! Stand back and be amazed at your masterpiece! Good job! :)

Yarn and Nail Art | Simply Mrs. Edwards

Yarn and Nail Art | Simply Mrs. Edwards

This looks a million and a half times better than the blank wood that used to be there, don’t you think!?

Yarn and Nail Art | Simply Mrs. Edwards

I hope that you’re reminded of God’s unfailing love today. It is because of Him that I have the ability to create and for that I am very thankful.

With love,
Mrs. Edwards

A Little Lovin’

Confession: other than decorating for Christmas, I’m typically pretty lame at decorating for other holidays throughout the year. It’s not that I don’t WANT to decorate, it’s just that I’m terrible at remembering holidays more than 3 days in advance. By some miracle, at the beginning of this month I actually remembered that Valentine’s happens on the 14th of February AND to top it off, I made some fancy love themed artwork! Although, I think these pieces may have to stay up at least through the end of February because they’re just so dang sweet.

Valentine's Art | Simply Mrs. EdwardsI found this really cute free printable over at Tried & True. I printed it out on medium weight paper and colored it in with water color pencils. I’m a pretty awful artist, so being able to color in between the lines with the water color pencils and go back over it with a wet paintbrush is my kind of art :)

Valentine's Art | Simply Mrs. Edwards

short homecoming dresses I love the subtle difference between the pencil only (on the right) and the finished product (on the left).

Valentine's Art | Simply Mrs. EdwardsThis cute little thing now lives on the wall above our couch in the living room. With all of the pictures of just Josh & I, this wall has unintentionally become a bit of a shrine…haha. I think it’s definitely time to print out some new pictures of family and friends to put up there!Valentine's Art | Simply Mrs. Edwards

Valentine's Art | Simply Mrs. Edwards

This next little diddy was inspired by the one and only Pinterest. Yeah, I not only jumped on the Scrabble letter bandwagon, but I caught a ride on the chevron train too. I didn’t want to spend $20 on a brand new Scrabble game just to pull a few letters out, so I opted for some wooden letter tiles from our local craft store. Although they don’t have the little score number in the bottom corner, I think the $4 price tag for 40 letters was well worth the sacrifice! (UPDATE  – here are some real Scrabble tiles from Amazon: http://amzn.to/1OiDSLY)

Valentine's Art | Simply Mrs. EdwardsI started off with an Ikea shadowbox frame that I found at Goodwill for $1.99 (score!). Then I used spray adhesive to attach the chevron fabric to the backing of the frame and hot glued the letters in place. Easy and so cute!

I paired the Love You art with a photo that was taken right after Josh proposed to me almost 3 years ago! Wow, time flies when you’re in love, huh :)

Valentine's Art | Simply Mrs. EdwardsThe frames now live above the sink in our kitchen. They’re the perfect pick-me-up for when I have to do the dishes.

Valentine's Art | Simply Mrs. EdwardsI may or may not have done the dishes just to take this photo. There’s no tellin’ though.

Valentine's Art | Simply Mrs. EdwardsDo you decorate for Valentine’s and other holidays? Or, do you stick to decorating for the big ones and forget the fringe ones like I usually do?

With love,
Mrs. Edwards